Luscence
 |
|
|||||||||||||||
|
||||||||||||||||
Luscence
|
Luscence
CW-W130 (round) |
Luscence
CW-W131 (elongated) |
|
POSTERIOR,
FEMININE CLEANSING |
Water
supply |
Direct connection to water supply | |
Allowable
water pressure range |
8.5—106.7psi (0.06—0.74 Mpa; 0.6—7.5kgf/cm2) | ||
Power supply |
AC 120V, 311W, 60Hz | ||
Dimensions |
15.4”W
x 18.5”D x 7.6”H (390mm x 469.5mm x 192mm) |
15.4”W
x 20.9”D x 7.6”H (390mm x 531mm x 192mm) |
|
Weight |
Approximately 11.3lbs (5kg) | ||
Warm
water tank capacity |
0.95qt (0.9 liters) | ||
Nozzle
arms |
Separate auto slide nozzle arms for posterior and feminine cleansing | ||
Nozzle
jet diameter |
Posterior
cleansing nozzle arm: 0.04” (1.0mm) x 3 jets Feminine cleansing nozzle arm: 0.03” (0.8mm) x 10 jets |
||
Spray
volume |
0—1.1qt/minute (0-1.0 liters/minute) |
||
Warm
water heater wattage |
250W | ||
Warm
water temperature adjustment (approximate) |
OFF:
water supply temperature; LOW: 93°F (34°C) MID: 97°F (36°C) HIGH: 100°F (38°C) |
||
Safety
devices |
Thermal fuse; multiple high-temperature warning sensors; float switch to prevent empty tank operation; stability sensor | ||
DRYER |
Air
volume |
35.31ft3 per minute (0.3m3 per minute) | |
Air heater temperature adjustments and wattage |
LOW:
0W (room temperature) MEDIUM: 150W HIGH: 300W |
||
Safety
devices |
Thermal fuse |
||
TOILET
SEAT |
Heater
wattage |
42W | 45W |
Seat
temperature (approximate) |
OFF:
room temperature LOW: 87°F (30.5°C) MID: 93°F (34°C) HIGH: 99°F (37°C) |
||
Temperature
control |
Microcomputer | ||
Safety
devices |
Thermal fuse |
||
Power
cord length |
3.9ft (1.2m) | ||
Other
functions |
-
Occupied seat sensor - SlowDown lid and seat - Nozzle auto cleaning - Nozzle self-cleaning button - Toilet seat heater auto shut-off |
||
| Note:
The Luscence Advanced Toilet Seat may be incompatible with certain
bathrooms or toilets. For details please consult your nearest dealer.
|
|||
Simple, fuss-free installation
Advanced toilet seats from INAX are compatible with standard U.S. toilets, and can easily be installed on the majority of existing toilet units. Installation is unlikely to take more than 30 minutes. Detailed instructions are provided in materials accompanying your new advanced toilet seat. Overview of installation steps |
Note: Advanced toilet seat requires the use of an electrical outlet with
a ground fault circuit interrupter. If you do not already have such an
outlet, please consult a professional electrician. Customers are responsible
for any installation expenses incurred.
Tools
required for installation
Adjustable wrench
Phillips and slotted screwdrivers